AY450
Machine Technical Date:
Injection Unit | ||||
Shot volume | cm3 |
1443 |
1657 |
1885 |
Shot weight (PS) | g |
1328 |
1524 |
1657 |
Oz |
47 |
53.8 |
61.2 |
|
Screw diameter | mm |
70 |
75 |
80 |
Injection pressure | Mpa |
212 |
184 |
162 |
Injection rate | g/sec |
389 |
446 |
508 |
Screw L/D ratio | L/D |
22.5 |
21 |
19.6 |
Screw stroke | mm |
375 |
||
Screw speed (stepless) | Rpm |
0 ~ 180 |
||
Clamping Unit | ||||
Clamping force | Ton |
450 |
||
Opening stroke | mm |
760 |
||
Platen size | mm |
1100 x 1070 |
||
Space between tie bars | mm |
780 x 730 |
||
Max. daylight | mm |
1370 |
||
Mold thickness (min-max) | mm |
300 ~ 750 |
||
Hydraulic ejector stroke | mm |
210 |
||
Hydraulic ejector force | Ton |
12 |
||
Ejector pin | pcs |
13 |
||
Hydraulic Unit | ||||
Hydraulic system pressure | Mpa |
17.5 |
||
Pump motor | kW |
45 |
||
Servo driver power | kW |
45 |
||
Heating capacity | kW |
28 |
||
Number of temp control zones | pcs |
6 |
||
General Data | ||||
Oil tank capacity | L |
500 |
||
Machine dimensions | m |
7.3 x 1.85 x 2.4 |
||
Machine weight | Ton |
17 |
Ferrimino series Injection unit
- Swiveling type + Two layers Linear Guide Rails Injection Unit
- Swiveling designed injection unit helps change screw and barrel to be much easier
- Two layer linear guide rails helps shorten the length of injection unit support device, less deformation of the support device
Ferrimino series Clamping unit
- Wider range space between tie-bars, more molds size available and able to meet the needs for automatic mold installation system.
- Long and wider designed movable platen moving feet ensure stable mold open and close movement
- Ejector with adjustable stroke, meets more special ejector movements
Write your message here and send it to us